Firmware Update Utility by Thorlabs
===================================

Version 1.14.62 - 24th July 2025
================================

Device Firmware
---------------
- BSC20X Motherboard
    - v2.3.5 (internal release only)
        - Added support for the replacement XR16V798 UART.
    - v2.3.6
        - Provided hardware version support.
- KPA101
    - v2.0.3
        - Fixed bug related to closed loop position setpoint adjustability.
        - Added disconnect notification after user initiates power down.
- KPC101
    - v1.1.7
        - Fixed bug with hardware info message sending incorrect product serial number.
    - v1.1.8
        - Added disconnect notification after user initiates power down.
- KSC101
    - v1.0.7
        - Fixed bug with hardware info message sending incorrect product serial number.
- KVC101
    - v1.1.1
        - Added disconnect notification after user initiates power down.
- PDXC2
    - v1.0.7 (internal release only)
        - Add commands to support start/stop automatic status updates.
        - Fixed bug on "Enabled" status bit in the status update message.
    - v1.0.8
        - Fixed bug on start/stop automatic status updates.
- UDXC
    - v1.0.1
        - Initial release.


Version 1.14.61 - 23rd May 2025
===============================

Device Firmware
---------------
- KDC101
    - v2.2.11
       - Fixed interoperability bug with XA.


Version 1.14.60 - 1st April 2025
================================

Device Firmware
---------------
- KDC101
    - v2.2.9
        - Added support for MTS100.
    - v2.2.10
        - Added support for MTS25 and MTS50 with EEPROM identification.
- LTS150C, LTS300C
    - v1.0.2
        - Increased potentiometer dead band to stop motion creep.
- KST201
    - v2.0.8
        - Support for new revision electronics.

Please refer to the Kinesis history.txt file for details of older firmware versions.